The CX2 smartwatch is a smart watch that supports recording daily activity and health data. It not only supports the measurement of health data such as heart rate, blood oxygen, and pressure, but also provides automatic monitoring of heart rate and sleep at night. In addition, you can easily manage your exercise data by setting common exercise modes through the App.
Before first use
1. Charge
Connect the charger port to the charging area at the bottom of the watch to start charging.
Attention: In order to avoid damage to the device during charging, it is recommended to use a charger with a rated voltage of 5V.
2. Activate
Charge for 6-10 seconds to activate the device.
3. Turn on
Press and hold the button for 3 seconds to turn it on.
Operation instruction
1.Button function
1) press to：
- Wake up screen
- Enter the menu list
- Return to main screen
2) Long Press to：
- Power on/off
- Wake up SOS
2.Screen controls
- Swipe down: Shortcut menu
- Swipe right: App board
- Swipe left: Smart widgets
- Swipe up: Message notification
App download and connection
1.App download
1) Please go to the "App Store" or "Google Play,"search for "Runmefit," download and install.
2) Or scan the QR code below to download and install.
* Detailed steps please refer to<How do I download the "Runmefit" App?>
2.Connection
Before connecting, make sure your phone's Bluetooth is turned on. Be sure to make a Bluetooth connection within the runmefit app. You can't connect in your phone's system Settings.
1) Open the “runmefit” app；
2) Choose Device > Add Device. In the Bluetooth list, tap the device name of the corresponding model and tap to connect.
3) Or find the icon of "Connect phone" on the smart watch, and scan the QR code on the watch through the QR code scanning function of the App to connect.
* Detailed steps please refer to <How do I connect my device to the "Runmefit" app?>
Connect to call Bluetooth
After the APP connection is complete, the call Bluetooth connection is successful by default.
1) Turn off Bluetooth calls: press the knob, go to the bottom of the "Phone" function in the menu list, and click "Disconnect audio Bluetooth".
2) Use Bluetooth again: Open the "Audio Bluetooth" switch again, and the phone will automatically connect.
Attention：
- Turning on Bluetooth will greatly increase power consumption, resulting in a significant decrease in battery life.
- We recommend that you turn off audio Bluetooth when you are not using Bluetooth for a call.
- When Bluetooth for Audio is turned off, the "Voice Assistant" function will not be available.
* Detailed steps please refer to <How do I enable Bluetooth calling on my device?>
How to Wear the Watch
For more accurate measurement data, please contact the bottom sensor side of the watch with the skin. Leave a finger width between the edge of the band and the wrist.
Precautions
1) This product has IP68 waterproof rating, only suitable for daily waterproofing, such as light rain, splashing and washing hands.
2) Please avoid wearing it when swimming for a long time or in open water.
3) Do not wear it during diving, hot showers, saunas or other water sports.
4) Avoid use in high temperature environment, so as not to cause equipment damage.
5) Please note that this product is not a medical device. All data and measurements are for reference only and should not be used for medical diagnosis.
FAQ
- How do I connect my device to the "Runmefit" app?
- Why does my device keep disconnecting from the "Runmefit" App?
- Why can't my device receive notifications?
- Why does the step count on my device differ?
- Why do my device's heart rate readings differ?
- Why is there no historical health data on my device or app?
- How do I use the Music Control and Remote Camera functions?
- Why can't the Runmefit app connect or find my device?
- How do I set the correct device time?
- Why doesn't my device light up when I flip my wrist?
- How do I download the "Runmefit" App?