How to Set Time and Weather

Time Setting and Synchronization

If this is your first time using the device, please follow these steps:

1. Charge the device to activate it.
2. Connect the device to the Runmefit app.
3. The device time will automatically synchronize with your phone's time.

Note: For detailed instructions, please refer to the “Before First Use” section of the tutorial.

The time may be reset or become inaccurate in the following situations:

• The device has not been used for an extended period.
• The battery was depleted and the device was restarted after recharging.
• The device was restored to factory settings.
• Other special circumstances.

Solution: Reconnect the device to the Runmefit app and pull down to refresh the home page to 100%. The device will automatically sync to the current time.

Weather Setting and Synchronization

If this is your first time using the device, please follow these steps:

1. Charge the device to activate it.
2. Connect the device to the Runmefit app.
3. Once the connection is successful, the weather information will be automatically synced to the device.

Note: For detailed instructions, please refer to the “Before First Use” section of the tutorial.

Subsequent Weather Synchronization Logic:

• Within 1 hour of first sync: Pulling down to refresh on the app's home page will use the previously synced weather data and will not update.
• After 1 hour: The app will fetch the latest weather data and sync it to the device.